OUTDOOR SEALER FOR BRICKWORK, MASONRY AND POROUS VERTICAL STONE SURFACES
StoneCare4u ESSENTIAL BRICK SEALER (25 Litre) is formulated with technical synthetic resins that seals and protects brick surfaces. The sealer offers excellent water repellency and helps to reduce efflorescence, moss and algae growth. It offers long-lasting protection and once sealed, the brick requires very little maintenance. Ready to apply straight from the bottle, the quick and easy solution to sealing your brickwork.
Powerful performance with an eco-friendly formula
StoneCare4u Essential Brick Sealer (25 Litre) is a professional, eco-friendly formula that provides excellent water repellency and stain resistance to external brick, concrete, natural stone and masonry surfaces.
StoneCare4u Essential Brick Sealer (25 Litre) is a technical, synthetic resin emulsion that significantly reduces the capillary water absorption of treated surfaces. However, it doesn’t clog the pores or capillaries. Most importantly, it significantly reduces the potential for organic soiling and moss and algae growth, whilst allowing the surface material the ability to “breathe” and transfer moisture vapour.
HOW TO APPLY:
- Before use, remove any loose debris from the work surface and ensure you have adequate personal protection, i.e gloves, suitable protective eye-wear, FFP3 class mask & clothing.
- Certainly, it is important to perform a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements DO NOT PROCEED but contact us to return the product.
- Before application, the surface must be completely clean and dry. Application methods include a low-pressure sprayer, roller, natural fibre brush or sponge.
- Apply StoneCare4u Essential Brick Sealer (25 Litre), to saturation, two coats “wet on wet” are needed to ensure complete coverage. DO NOT DILUTE. Surface dry after 45-60 minutes. If rain is forecast or starts, then stop treatment immediately and cover the freshly impregnated areas, the surface is required to stay completely dry for the first 6 hours after application.
Please Note: StoneCare4u Essential Brick Sealer (25 Litre) may delicately enhance the natural colour of the brick surface – always try the product in an inconspicuous area prior to use. Surfaces which are not to be sealed should be protected with masking material.
MAINTENANCE:
Clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface.
